Introduction
A floating TV stand is a type of media console that is mounted directly to the wall, creating the illusion that it is “floating” off the ground. This design has become increasingly popular in contemporary interior design for its sleek and sophisticated appearance. Unlike traditional TV stands that rest on the floor, a wall-mounted TV cabinet frees up valuable floor space, making your room feel larger and less cluttered. This is particularly beneficial for smaller living areas where maximizing space is essential. When you buy this floating TV stand, maybe you have some curious about how to install this on your living room space. This post guide you to check your wall type and choose right accessories to finish installation.
Preparation for Installation
A successful and seamless installation process depends on being ready before you start. This entails assembling the required equipment and accessories and, most all, figuring out what kind of wall you’ll be dealing with.
Firstly, you need to know what’s your wall type, such as drywall, concrete wall and so on. Let’s take drywall as an example. Absolutely, for different wall type, Floaticasa prepared different accessories in your package. Here is Floaticasa Youtube video guide: how to install TV stand on dry wall.
Accessories and Tools to be Prepared
Having the right tools on hand will make the installation process much more manageable. Here’s a list of tools and accessories you’ll likely need for your floating TV stand installation:
Power Drill: Essential for drilling pilot holes into the wall. Floaticasa all floating TV stands have pre-hole for wires and installation, and if you want to customize more or less holes to install on your wall, Floaticasa also suppor that.
Drill Bits: You’ll need various sizes, including one that matches the diameter of your wall anchors. An 8mm drill bit is commonly used.
Screwdriver Set: Both Phillips head and flathead screwdrivers will be useful. A power screwdriver can save you time and effort.
Spirit Level: Crucial for ensuring your TV stand is perfectly horizontal. A 24-inch or longer level is recommended for accuracy.
Measuring Tape: For accurately measuring the height and placement of your TV stand.
Pencil or Marker: To mark the drilling points on the wall.
Stud Finder: A vital tool for locating wall studs, especially when installing on drywall.
Wall Anchors: The type of anchors you use will depend on your wall type. We’ll discuss this in more detail below.
Screws and Fasteners: Your floating TV stand should come with the necessary screws and fasteners. Double-check that you have all the parts listed in the assembly manual.
5 Steps of TV Stand Installation
Once you’ve prepared your tools and identified your wall type, you’re ready to begin the TV stand installation. Follow these steps carefully for a secure and visually appealing result.
Step 1. Measure and mark for accurate placement
The first step is to decide on the ideal height for your floating TV stand. A general rule of thumb is to have the center of your TV screen at eye level when you’re seated. Consider the size of your TV and the height of your seating arrangement. Once you’ve determined the height, use a measuring tape and a spirit level to draw a straight, level line on the wall where the top of the TV stand will be. Then, use the mounting bracket or the TV stand itself as a template to mark the drilling points on the wall.
Step 2. Assemble the Drawers and Cabinet
Before mounting the main cabinet to the wall, it’s often easier to assemble some of the components first. Follow our instructions to assemble the main body of the wall mounted TV cabinet. This will make the unit lighter and easier to handle during the mounting process. Some of our cabinets will be shipped as assembled, but note that if the cabinet is a drawer, you may need to remove the drawer first when it goes on the wall, and install the drawer last after the cabinet is securely installed.
TIP: On our website FLOATICASA, each product has a corresponding installation diagram, which can be downloaded at this location on the page.
Step 3. Securely Hook the Anchor to the Wall
This is the most critical step in the installation process. Based on your wall type, drill pilot holes at the marked points. For drywall, if you’re not drilling into a stud, use a toggle bolt. For concrete or brick, use the appropriate masonry anchors. Insert the anchors into the drilled holes and then lift the floating TV stand into place. Align the mounting holes on the back of the TV stand with the anchors in the wall and secure it with the provided screws. Use the spirit level again to ensure the TV stand is perfectly level before fully tightening the screws.
Step 4. Master Cable and Wire Management
One of the main appeals of a floating TV stand is its clean, wire-free look. Most floating TV stands come with built-in cable management systems, such as cutouts or channels, to help you hide unsightly cords. You can also use in-wall cable management kits to run the cables from your TV and other devices behind the drywall for a truly seamless look.
Step 5. Appreciate the Advantages of a Floating TV Stand
With your floating TV stand securely mounted and your cables neatly managed, it’s time to step back and admire your work. A floating TV stand not only enhances the aesthetics of your living room but also offers several practical benefits. It creates a sense of spaciousness, provides convenient storage, and makes cleaning easier. Enjoy the modern, clutter-free environment you’ve created.
Frequently asked questions during installation
Here are some common questions that may arise during the installation of a wall-mounted TV cabinet:
Q: How high should I mount my floating TV stand?
A: The ideal height depends on your TV size and seating height. A good starting point is to have the bottom of the TV stand about 20-30 inches from the floor.
Q: What if the mounting holes don’t align with the studs?
A: If the pre-drilled holes on your TV stand don’t line up with the wall studs, you can use heavy-duty toggle bolts or a French cleat mounting system for a secure hold on drywall.
Q: How much weight can a floating TV stand hold?
A: The weight capacity varies depending on the model and how securely it’s mounted to the wall. Always check the manufacturer’s specifications and ensure you’re using the appropriate anchors for your wall type.
Conclusion
Installing a floating TV stand actually is an easy job that could significantly impact the appearance and feeling of your living area. A professional and safe installation may be accomplished through using the appropriate equipment and procedures for your particular wall type, following our step-by-step tutorial on how to install TV Stand, and being well-prepared. A wall mounted TV cabinet is an excellent purchase that integrates modern design, usage, and style to give you a stunning and well-organized entertainment area for many years to come.