1. Dimensions & Finish
Dimensions: 72” Long x 12” Tall x 7” Deep.
Finish: Modern Black.
Note on Depth: I understand the total external depth may vary slightly to accommodate the thickness of the French cleat.
2. Top Panel (Smooth)
Requirement: The top surface must be completely smooth. Please ensure there are NO cord holes and NO routed handle cutouts.
3. Custom Cable Management
Bottom Entry: One 2-inch diameter hole on the bottom panel, located 7.5 inches from the left edge (positioned toward the back wall).
Internal Routing: The left vertical divider needs a 2-inch notch (mouse hole) cut out of the bottom-rear corner to allow cables to pass into the center section.
4. Integrated Wood French Cleat & Flush-Mount Recess
Mounting: Please install your French cleat system.
Back Panel Recess: Please recess the back panel at whatever depth is necessary for your cleat so that the unit sits perfectly flush against the wall once mounted. The top and side panels should extend past the back panel to hide the bracket.
5. Lighting
LEDs: NO LED lights.
The confirmed design drawings
- Side view image
2. Back view image
3. Front view image
4. Top view image
5. Group (Closed & Open)
